A running sedan hauled open from North Carolina to Texas costs about $775 to $1,150 and spends roughly 3 to 6 days on the road. The 16 routed pairs cover 978 to 1,413 miles. Name your Texas delivery city early, because it shifts the mileage more than the North Carolina pickup does.
How Does a Car Get From North Carolina to East, Central and Coastal Texas?
We route from Winston-Salem, Fayetteville, Durham and Wilmington in North Carolina to Longview, Beaumont, Waco and Corpus Christi in Texas. Across the 16 pairs the road distance runs from 978 miles, Winston-Salem to Longview, to 1,413 miles, Wilmington to Corpus Christi. Texas drives most of the difference. From any one North Carolina start, Longview is nearest, then Beaumont, Waco and Corpus Christi, and the four Texas cities sit 338 to 342 miles apart, while the four North Carolina starts differ by only 93 to 96 miles for one Texas address. In our routing, Longview and Waco cars run I-20 for most of the trip. Beaumont and Corpus Christi cars turn south from I-85 onto I-65 and then head west on I-10, with I-12 in between.

Why Does the Texas Delivery City Move the Price More Than the North Carolina Pickup?
Your quote depends on your vehicle, the exact pickup and delivery addresses, the season and the trailer type, so run the calculator for a figure on your dates.
The Texas end carries most of the mileage swing on this lane. From Durham, Longview is about 1,042 road miles, Beaumont 1,090, Waco 1,205 and Corpus Christi 1,384, and each of the four North Carolina starts lists them in that sequence.
Where the car starts in North Carolina matters less. For a Waco address, Fayetteville adds 53 miles over Winston-Salem, Durham adds 64 and Wilmington adds 96.
Vehicle size and trailer type also count. A pickup or large SUV takes extra deck room, and an enclosed rig holds fewer cars, which lifts the cost of each space.
Give us the pickup date plus both street addresses and the quote follows your own lane.

An ordinary sedan on an open trailer generally runs $775 to $1,150 from North Carolina to Texas. The lowest figures belong to Winston-Salem cars bound for Longview, the highest to Wilmington cars bound for Corpus Christi. The car shipping calculator gives a price for your exact pickup and drop-off.
A pickup, van or large SUV adds roughly $100 to $200 for taking more deck space. An inoperable vehicle requires winching, which is a separate charge. An enclosed trailer carries fewer cars, so choosing enclosed adds roughly 40 to 60 percent.
- The Texas city. Longview is nearest, then Beaumont, Waco and Corpus Christi, and the four sit 338 to 342 miles apart from any one start.
- The North Carolina start. Winston-Salem is nearest, then Fayetteville, Durham and Wilmington, spread 93 to 96 miles for any one Texas address.
- The roads. I-20 carries Longview and Waco cars, while Beaumont and Corpus Christi cars use I-85, I-65, I-10 and I-12.
Treat a quote far below every other offer with caution. Carriers may skip a load priced under their normal rate, and then your car sits waiting for a truck.

What Factors Actually
Influence Pricing on This Route?
Five things move the price on any lane: the vehicle's size, whether it runs, how easy each end is to reach, the season and the trailer type. Booking early protects your timeline, keeps pricing steady and reduces the risk of last-minute carrier changes.

Size decides how much deck space your vehicle takes and how many other cars fit alongside it. A standard sedan is the cheapest thing to move because it slots almost anywhere on the trailer. SUVs, pickups and vans take more room and usually cost more on the same lane.
Does Driving 1,205 Miles to Texas Beat Booking a Carrier?
Using a Transporter
By our routing, Winston-Salem to Longview is about 18.1 hours of driving and Wilmington to Corpus Christi about 26.2, so even the shortest pair means a long day and part of another on the road.
A carrier suits a household that needs the car in Texas on a set date, or one with another vehicle and only one driver.
Driving the Distance
Our sample pair, Durham to Waco, is about 1,205 miles and 22.4 hours of driving, more than two days at ten hours behind the wheel.
Remember the return leg too. Whoever drives the car down needs a flight or bus ticket back to North Carolina, along with fuel and hotel nights.
How Long Does a Car Spend in Transit From North Carolina to Texas?
After loading, plan on 3 to 6 days in transit. Winston-Salem to Longview, our shortest pair at 978 miles and 18.1 hours of driving, tends to land at the low end, while Wilmington to Corpus Christi, 1,413 miles and 26.2 hours, tends to land at the high end.
Before pickup, dispatch typically spends 1 to 3 working days finding a licensed carrier for your dates, so a flexible window helps.
A late loading day or extra drop-offs on the same truck can add time, and Rivalane makes no fixed timing promise.
When Should You Book a North Carolina Pickup for Texas?
Book early if your dates allow. A truck already running I-20 or I-10 toward Texas is easier to find when your pickup day can move, so tell us how many days it can shift either way.
Our cross-country timing guide covers when long hauls run early or late. Need a different North Carolina lane? See the North Carolina to Ohio route.
Should a Car Bound for Texas From North Carolina Ride Open or Enclosed?
The majority of cars here ride open transport, on a deck with no walls or roof, in the same weather as other traffic on I-20 and I-10.
Enclosed transport shuts the vehicle in a covered trailer for the whole haul. Closed trailers hold fewer vehicles and price each space higher, usually by 40 to 60 percent.
A classic, new paint or a low sports car makes a good case for enclosed. A daily-driver sedan from Durham to Waco usually goes open without trouble.
Enclosed Car Transport
Enclosed demand rises for high-value, specialty and seasonal vehicles, and enclosed trailers protect against road debris and weather, which matters most on longer hauls. Enclosed rigs are a small fraction of the trailers working any given lane, and that scarcity is what drives both the higher price and the longer booking lead time.
Open Car Transport
Most vehicles move on open trailers, and for most routes that is the more cost-effective way to ship a car.
Open transport works well for standard vehicles and keeps costs predictable. It also offers the widest carrier availability.
What Should You Do on Delivery Day in Texas?
Texas is large, so give dispatch a delivery address a full-length trailer can reach and a phone number you will answer on the day. If your street or subdivision is tight, name a nearby lot or main road ahead of time.
Once the car is unloaded, check it against your pickup photos in daylight, look at every side, the roof and the wheels, and write any new mark on the bill of lading prior to signing. Keep your copy of the paperwork.
Rules on Texas registration, insurance and inspection sit with the state, so check them with your county tax office or TxDMV; this page leaves them out.
Where Can the Truck Reach Your Car in North Carolina and in Texas?
A full-length hauler cannot always get down a narrow street, so agree on the meeting spot before pickup day. In Wilmington, older downtown blocks and riverfront lots can be tight, Fayetteville and Durham apartment complexes may keep the truck out, and Winston-Salem streets with parked cars on both sides can do the same. A big-box lot or wide arterial road nearby is the usual fix. The North Carolina car shipping page has pickup notes.
In Texas, gated subdivisions in Waco and Corpus Christi, apartment lots in Beaumont and older streets in Longview can leave the driver short of the door, and a parking lot or main road close by solves most of them. The Texas car shipping page has drop-off notes.
Inspect the vehicle alongside the driver at pickup and again at drop-off, photograph all four sides and record every existing mark. Confirm the bill of lading lists each one before you sign.

What Should You Confirm Before Booking North Carolina to Texas Auto Transport?
Rivalane operates from Melville, New York, and books a licensed carrier for each order on this lane. Tracking starts at loading. When you request a quote, name the Texas city up front, because the roughly 340 miles between Longview and Corpus Christi outweigh the 96 between Winston-Salem and Wilmington.
Frequently Asked Questions
A running sedan on an open carrier costs $775 to $1,150. Most of the spread comes from the Texas delivery city: the four Texas cities sit 338 to 342 road miles apart from any one start, while the four North Carolina starts differ by 93 to 96 miles for one Texas address. A bigger vehicle or an enclosed trailer raises the figure.
Count on 3 to 6 days on the road after loading. Winston-Salem to Longview, about 978 miles, is the shortest pair, and Wilmington to Corpus Christi, about 1,413, the longest. Before pickup, dispatch typically spends 1 to 3 working days finding a licensed carrier.
By our routing, Longview and Waco cars run I-20 for most of the trip, with I-85 carrying Durham and Winston-Salem cars to it and I-95 feeding Wilmington and Fayetteville cars. Beaumont and Corpus Christi cars turn south from I-85 onto I-65, then run I-10 west with I-12 along the way. A carrier may choose a different road.
Only slightly. For any one Texas address, the four North Carolina starts sit within 93 to 96 miles of each other, with Winston-Salem nearest and Wilmington farthest. The Texas delivery city, which spans about 340 miles, shifts the quote far more.






